|
Product Details:
Payment & Shipping Terms:
|
| Grade: | S50C / 1.1210 / SAE1050 | Thickness: | 80-250mm |
|---|---|---|---|
| Width: | 155-2200mm | Process: | EAF+LF+VD+ESR |
| Payment Term: | 30% Deposit, Balance By L/C At Sigth After Shipment | Quality Inspection: | Ut, Chemical Test, Microstructure |
| High Light: | heat treating tool steel,machining tool steel |
||
S50C / 1.1210 Special Carbon Steel Flat Bar For Plastic Mould
♦ Introduction:
Grade S50C carbon steel is a high quality medium carbon steel,which adopted by the furnace, open-hearth, or oxygen converter steelmaking manufacture full killed steel having a uniform microstructure features.
The carbon composition of this kind of steels is over 0.4%, and it has good wear resistance, high tensile strength,easy for deformation and crack when quenching,so that quenching for this material is very importance and it must quick cooling after tempering in order to avoid temper brittleness.
It can improve the machinability of these carbon steel through spheroidizing. This steel is usually tempered to hardness 19~22HRC, to increase its cutting performance.
♦ Available size(mm):
| Flat Bar Size(mm) | Round bar Size(mm) | |||
| Thickness | Width | Length | Diameter | Length |
| 10-700 | 155-2200 | 3000-6000 | 10-300 | 3000-6000 |
♦ Similar grades: DIN 1.1210 / AISI SAE1050 / JIS S50C
♦ Chemical Composition(%):
| C | Si | Mn | P | S | Cr | Ni | Cu |
| 0.41-0.50 | 0.15-0.35 | 0.6-0.9 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.25 | ≤0.25 |
♦ Applications:
1, Can be used for a variety of cold mold die pad.
2, For the manufacture of high wear resistance, dynamic load and impact of the role of small machined parts and spring pieces.
3, Standard template material.
♦ Feature:
| 1, | High-quality medium carbon steel,uniform characteristics of the microstructure. |
| 2, | Carbon content (mass fraction,%) ≥ 0.4, good wear resistance,ductility reduction. |
| 3, | Tempering must be quenched to avoid the occurrence of temper brittleness. |
| 4, | It can improve the machinability of these carbon steel through spheroidizing.He steel is usually tempered to hardness 19~22HRC, to increase its cutting performance. |
♦ Terms of payment:
30% deposit T/T and the balance by L/C at sight, or T/T
♦ Delivery condition:
1) EF or ESR, hot rolled or forged, black surface or milling.
2) For abundant stock, 15-20 days.For customized products, 30-50 days.
We have ready stock for most of material grades in our warehouse. If the material don't have stock, the delivery lead time is about 30-50 days after receiving your prepayment or firm order.
♦ Why choose us?
1: We promise the final order quality will be consistercy as sample order.
2: We can offer you variation quality.
3: Trustworthy
We hope we become your trustworthy supllier in china.
4: We hope we can be your honest dealer.
5: We never crook our customers.
6: If you check black list you will not find our name.
Product pictures:
Contact Person: Echo
Tel: +86 18148729336
Fax: +86-020-8251-5866
