Forged S45C / C45 High Carbon Alloy Steel Round Bar Diameter 20 - 500mm

Forged High Strength S45C / C45 High Carbon Alloy Steel Round Bar

S45C high carbon alloy steel

S45C steel is made of electric furnace, open hearth furnace or pure oxygen converter made of all-steel, the steel microstructure uniform, no defects.

Chemical Composition(%)

Feature

The carbon content of more than 0.4%, excellent wear resistance, but ductility decreases, deformation and cracking easily quenching, so the heat treatment is extremely important and must be quenched after tempering to avoid temper brittleness.

Through the ball of the steel treatment, can improve the cutting performance of such carbon steel.

Is a higher strength of a high-quality carbon steel, hardened due to poor, generally used in the normalized state, the higher the mechanical properties, the use of quenched and tempered.

Medium cold deformation, annealing and normalizing machinability than the quenched and tempered. For the manufacture of higher strength parts, such as gears, shafts, piston pins, and less stressed mechanical parts, forgings, stampings and bolts, nuts, pipe.

Mechanical properties

Tensile strength σb (MPa): ≥600 (61)
Yield strength σs (MPa): ≥355 (36)
Elongation δ5 (%): ≥16
Section shrinkage ψ (%): ≥ 40
Impact energy Akv (J): ≥39
Impact toughness value αkv (J / cm2): ≥ 49 (5)
Hardness: not heat treatment, ≤ 229HB; annealed steel, ≤ 197HB

usage

S45C carbon steel is widely used in machinery manufacturing, the mechanical properties of this steel is very good.

But this is a medium carbon steel, quenching performance is not good, 45 steel can be hardened to HRC42 ~ 46.

So if you need surface hardness, but also hope to play 45 # steel superior mechanical properties, often 45 # steel surface carburizing and quenching, so that you can get the required surface hardness.

Supply status hardness 137 ~ 170HBS, 167 ~ 229HBS, 201 ~ 269HBS

Delivery Time

Stock items 15-20 days; customized items 30-50 days.

Packing: Standard export packing; customers' special requests are accepted

 

Quality Condition

1. Both end of each bar must be cut as require
2. Ladle furnanced and vacuum de-gassed
3. Show heat No. on each bar
4. Surface condition the surface of the hot rolled square bar shall befree cracks, scar and wrinkles that affect the use of the billets. In case there is the above-mentioned defect, it shall be remove.
5. The mill test certificate shall show the chemical composition, and it is guaranteed that the chemical       composition shall be within the limit stipulated in the contract.
 

Why choose us?

Our company have introduced large-sized vertical saw machines, horizontal saw machines, milling machines, grinding machines and other advance equipment, exporting our products by wholesales and retail sales, big plate or flat, round bar are all available.

All our products can meet the standards of DIN, AISI, JIS and GB, all the material should be inspected the ultrasonic, hardness and others strict inspection process before the shipment!

Fast shipment & competitive price & super good service.

More photos