Payment & Shipping Terms:
|Grade:||M2 / 1.3343 / SKH51 / W6Mo5Cr4V4||Surface Treatment:||Black / Milling / Machined|
|Delivery Condition:||Forged Or Hot Rolled||Test:||SGS/Ut 100%/Element Testing|
|Standard:||DIN / AISI / JIS / GB / SWENEN||Payment Term:||30% Deposit, Balance By L/C At Sigth After Shipment|
alloy tool steel,
carbon tool steel
1.3343 / M2 Tempring High Speed Tool Steel To Make Cold Work Die
♦ Equivalent grades:
Grade M2 / 1.3343 steel is a general purpose molybdenum high speed steel.
Grade M2 / 1.3343 steel is characterized by balanced combination of abrasion resistance, toughness and good red hardness.
Due to its comparatively low carbon content, grade M2 / 1.3343 steel has an excellent combination of toughness properties and abrasion resistance when properly hardened and tempered.
Grade M2 / 1.3343 steel is used in a wide used for all kinds of cutting tool, knife and punch and die applications.
♦ Chemical composition(%):
♦ Available size(mm):
|Flat Bar Size(mm)||Round bar Size(mm)|
(1) The steel With carbide fine uniform, high toughness and good thermoplastic advantages;
(2) High hardness, high wear resistance, high hardenability;
(3) Enough plasticity and toughness, and have good casting, forging, welding and machining
performance,so it occupies in the tool steel and the important position.
♦ Heat treatment:
|Preheat:||1190～1210℃ or 1200～1220℃ heating|
|Tempering:||twice,2hours each time.|
|Delivery status:||hot rolled,forged,annealed,|
|Surface conditions:||rough turning, peeling, polishing|
|Delivery hardness:||≤285HB; annealed ≤269HB quenching: 730～840℃|
a, To make various cutters and cold work mild weth wearproof.
b, Production load large, complex shape and valuable tool (e.g., scraper, gear, milling cutter,
drilling, tapping, etc.
♦ Quality Condition:
1. Both end of each bar must be cut
2. Ladle furnanced and vacuum de-gassed
3. Show heat No. on each bar
4. Surface condition the surface of the hot rolled square bar shall befree cracks, scar and wrinkles that affect the use of the billets. In case there is the above-mentioned defect, it shall be remove.
5. The mill test certificate shall show the chemical composition, and it is guaranteed that the chemical composition shall be within the limit stipulated in the contract.
♦ About us:
Guangzhou ChangFeng Steel Co.Ltd. is an export agent company of Baosteel group special steel products, which is full of export experience to the market all over the world , such as America, Germany, Francem Italym Turke, Singapore, Thailand, Malaysia, Vietnam, Taiwan and Middle-East.
Our company keeps the principle of "sincerely cooperation, endless striving for perfection". We desire to establish the long-term mutual beneficial and win-win relation with importers all over the world.
Contact Person: Echo
Tel: +86 18148729336