Payment & Shipping Terms:
|Test:||SGS/Ut100%/Elements Testing||Technology:||Hot Rolled/ Forged|
|HS Code:||7228300000||Surface:||Black Surface|
|Shape:||Round Bar||Performance:||High Strength, Hardenability, Toughness|
|Flaw Detection:||CC / DD/ EE||Our Service:||CIF / FOB / EXW|
engineering special steels,
h13 tool steel
Alloy Steel SCM440 SAE4140 1.7225 42CrMo Steel Round Bar For Mechanical Use Gear
1. Chemical composition(%)
2. Equivalent grades
3. Available size(mm)
|Flat Bar Size(mm)||Round bar Size(mm)|
It's characterized by good strength, hardenability and toughness, and it has high creep strength and long lasting strength under the high temperature.
It's used to manufacture forgings that require higher strength and larger quenched and tempered section than 35CrMo steel, such as large gears for locomotive traction, supercharger transmission gears, rear axles, connecting rods and spring clamps that are heavily loaded. It can also be used for drill pipe joints and fishing tools for oil deep wells below 2000m.
For anneal, the hardness is less than 217HB.
For Q+T, the hardness is 28-32HRC.
When forging, firstly preheat the steel carefully, then raise the temperature to 1150-1200°C for forging. Do not forge below 850°C.
When annealing, firstly heat the AISI 4140 slowly to 800-850°C and allow enough time for the steel to be thoroughly heated, then cool slowly in the furnace to 480°C followed by air cooling.
8. Product pictures
Strict Quality Control
Contact Person: Echo